static routes intermittently stop being advertised in eigrp
I have a border router (RouterA)that is configured for eigrp 10 and 5 and distributes between the two. RouterB is in eigrp 5 and RouterC is in eigrp 10. Every now and again the static routes, and only the static routes, learnt from the eigrp 10 stop being advertised into eigrp5 even though they are still reachable from Router A, so routerB doesn't know about them.
There is no change in the topology.
Any views on this, has anyone experienced this.
Router A (cisco 7120-4T1) IOS is :
IOS (tm) EGR Software (C7100-IK2O3S-M), Version 12.1(7a)E1, EARLY DEPLOYMENT REL
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...