Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

suitable IOS for cat6509 L2 and L3

Hi,

Can any one suggest the stable running on cat 6509.for both L2 and L3.

please find the sh mod and sh ver of 6509

SM-MB-BSW1> (enable) sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

4 4 16 1000BaseX Ethernet WS-X6516-GBIC no ok

5 5 16 1000BaseX Ethernet WS-X6516-GBIC no ok

Mod Module-Name Serial-Num

--- ------------------- -----------

1 SAD053800NE

15 SAD053703HN

3 SAL0540CHXR

4 SAD0540061N

5 SAD053906MA

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-01-64-15-55-e0 to 00-01-64-15-55-e1 3.2 6.1(4) 6.2(2)

00-01-64-15-55-de to 00-01-64-15-55-df

00-d0-05-4a-a8-00 to 00-d0-05-4a-ab-ff

15 00-07-85-45-a4-40 to 00-07-85-45-a4-7f 1.2 12.1(7a)E1 12.1(7a)E1

3 00-07-4f-69-04-48 to 00-07-4f-69-04-77 5.0 5.4(2) 6.2(2)

4 00-d0-c0-d6-68-f4 to 00-d0-c0-d6-69-03 3.0 6.1(3) 6.2(2)

5 00-d0-c0-d6-5d-74 to 00-d0-c0-d6-5d-83 3.0 6.1(3) 6.2(2)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- ----------------------- ------------------- ----------- ------

1 L3 Switching Engine II WS-F6K-PFC2 SAD05370755 2.0

SM-MB-BSW1> (enable) sh ver

WS-C6509 Software, Version NmpSW: 6.2(2)

Copyright (c) 1995-2001 by Cisco Systems

NMP S/W compiled on Jun 11 2001, 12:44:26

System Bootstrap Version: 6.1(4)

System Web Interface Version: Engine: 5.3.1 ADP device: Cat6000 ADP Version: 1.5

ADK: 40

Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA054100CS

PS1 Module: WS-CAC-1300W Serial #: SNI05070271

PS2 Module: WS-CAC-1300W Serial #: SNI05360737

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE SAD053800NE Hw : 3.2

Fw : 6.1(4)

Fw1: 6.1(3)

Sw : 6.2(2)

Sw1: 6.2(2)

WS-F6K-PFC2 SAD05370755 Hw : 2.0

3 48 WS-X6348-RJ-45 SAL0540CHXR Hw : 5.0

Fw : 5.4(2)

Sw : 6.2(2)

4 16 WS-X6516-GBIC SAD0540061N Hw : 3.0

Fw : 6.1(3)

Sw : 6.2(2)

5 16 WS-X6516-GBIC SAD053906MA Hw : 3.0

Fw : 6.1(3)

Sw : 6.2(2)

15 1 WS-F6K-MSFC2 SAD053703HN Hw : 1.2

Fw : 12.1(7a)E1

Sw : 12.1(7a)E1

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 130944K 65576K 65368K 32768K 10805K 21963K 512K 300K 212K

Uptime is 147 days, 20 hours, 26 minutes

Thanks

2 REPLIES
New Member

Re: suitable IOS for cat6509 L2 and L3

I would make a suggestion of 6.3(10) for the supervisor and 12.1(11b)E4 for the MSFC.

Cisco Employee

Re: suitable IOS for cat6509 L2 and L3

I suggest that you read the release notes before making a decision

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/index.htm

6.4(3) and 12.1(11b)E11 should be good

88
Views
0
Helpful
2
Replies
CreatePlease to create content