Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SUP V - WS-X4516-10GE bootflash and DRAM question

I do not have a module in front of me to check.

Is there a document on CCO showing the location of the bootflash and DRAM on the WS-X4516-10GE SUP V card? Are these removabale or fixed? I have been through the complete documentation road map for this card and cannot see explained anywhere the location of the bootflash SIMM and DRAM and whether they are removable or not.

3 REPLIES
New Member

Re: SUP V - WS-X4516-10GE bootflash and DRAM question

Hi,

Sup V 10GE has 512-MB onboard SDRAM memory and 64-MB onboard flash memory (in addition to compact flash memory).

However I am not aware of the location of dram and flash.

New Member

Re: SUP V - WS-X4516-10GE bootflash and DRAM question

I am also aware that -

Sup V 10GE has 512-MB onboard SDRAM memory and 64-MB onboard flash memory (in addition to compact flash memory).

But what I wish to know is the location of these parts on the board and a link on Cisco's Web site showing the layout of this board, so that when I speak to a person on the phone who has the board in his hand, I can point to the location of these chips.

New Member

Re: SUP V - WS-X4516-10GE bootflash and DRAM question

See this doc:

http://www.cisco.com/en/US/customer/products/hw/switches/ps4324/prod_installation_guide09186a00805362c4.html#wp22111

It is for the WS-X4013+10GE Supervisor, but they are very similar and the components locations are the same.

332
Views
0
Helpful
3
Replies