02-14-2006 08:51 AM - edited 03-03-2019 01:50 AM
Tring to start the procedure to upgrade from hybrid to native mode.
Running hybrid catos/ios on sup2/msfc2...
In catos unable to see card from
dir slot0:
Unable to open slot etc....
Firmware of sup card is 7.1 and size of flash card is 64MB..
Any ideas
02-14-2006 09:18 AM
Do you have any files currently stored in the flash card ?
You may also try on an alternate slot to see if the problem gets fixed
Its possible that the file system in the card is not compatible with CATOS FS. You may have to format the card in the switch.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00802dcd5c.html#wp1025012
.
02-14-2006 09:57 AM
Prasanth is right. For non ata cards its slot 0 and for ATA cards its disk0
02-14-2006 09:42 AM
For 64MB flash cards, you need to do a "dir disk0:"
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm#wp379543
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
