Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SUP2/MSFC2 Unable to read flash card

Tring to start the procedure to upgrade from hybrid to native mode.

Running hybrid catos/ios on sup2/msfc2...

In catos unable to see card from

dir slot0:

Unable to open slot etc....

Firmware of sup card is 7.1 and size of flash card is 64MB..

Any ideas

3 REPLIES

Re: SUP2/MSFC2 Unable to read flash card

Do you have any files currently stored in the flash card ?

You may also try on an alternate slot to see if the problem gets fixed

Its possible that the file system in the card is not compatible with CATOS FS. You may have to format the card in the switch.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00802dcd5c.html#wp1025012

.

Re: SUP2/MSFC2 Unable to read flash card

Prasanth is right. For non ata cards its slot 0 and for ATA cards its disk0

Cisco Employee

Re: SUP2/MSFC2 Unable to read flash card

152
Views
0
Helpful
3
Replies