Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Sup3 uplinks on 4006

Hi there,

What's the best way to connect 2 wiring closets to Sup3 on 4006? Each closet houses 2 2950T-24.

Would the following configuration work?

Install 1000BaseT GBICs (WS-5483) into the Sup3. Connect Sup3 port to the first GigE port on SwitchA. Connect the second GigE port on SwitchA to a GigE port on SwitchB.

Do I need to use 1000BaseT crossover cables between the switches?

Is 1000BaseT GBIC supported in Sup3?

TIA

3 REPLIES
Cisco Employee

Re: Sup3 uplinks on 4006

Sup3 does not support Copper GBICs yet. It'll support them in the future software releases. But we do have 1000baseT line cards such as WS-X4412-2GB-T, WS-X4424-GB-RJ45 and WS-X4448-GB-RJ45

New Member

Re: Sup3 uplinks on 4006

....and crossover...

Highlighted
New Member

Re: Sup3 uplinks on 4006

yes you would use crossover between switch to switch connection

92
Views
0
Helpful
3
Replies