Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SUP720 CATOS RECOVERY on c6500

I am deliverin a customer training and one of my student has erased the catos 8.1.3 of the sup 720. I have no pcmcia card I can use as disk. So the only mean to recover is using xmodem. I have tried to use xmodem and ymodem from hyperterminal : it failed.

I have tried with tera term : it also faile.

Has anybody tried a xmodem transfer to a SUP720

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SUP720 CATOS RECOVERY on c6500

XMODEM is not supported on Sup720. There is a enhancement filed

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCec54182

If you have a contract, open a TAC case and ask for a loaner flash card(MEM-C6K-CPTFL64M). TAC can send a loaner flash card with CAT OS image on it.

1 REPLY
Cisco Employee

Re: SUP720 CATOS RECOVERY on c6500

XMODEM is not supported on Sup720. There is a enhancement filed

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCec54182

If you have a contract, open a TAC case and ask for a loaner flash card(MEM-C6K-CPTFL64M). TAC can send a loaner flash card with CAT OS image on it.

230
Views
0
Helpful
1
Replies