Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Sup720 for Catalyst 6506

I have an existing Catalyst6506 with MSFC2 Sups. I want to upgrade to SUP720 but the datasheet tells me that I should upgrade to a high speed fan. I have a 3000W power supply.

Does anyone know if it will work with the original FAN?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Sup720 for Catalyst 6506

Sup720 will not boot, actually, it will boot for about 5 mins and then keeps re-booting. In other words, it will not work.

Please rate this post if it helps.

3 REPLIES

Re: Sup720 for Catalyst 6506

Yes, you will need WS-C6K-6SLOT-FAN2, I assume that the chassis is non-E chassis (not a 6506-E). The WS-CAC-3000W will be able to support the WS-C6K-6SLOT-FAN2.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2566779

Please rate helpful posts.

New Member

Re: Sup720 for Catalyst 6506

Yes, the chassis is the non-E type. What will happen if i don't install the high speed fan? will it still boot? work?

Thanks!

Re: Sup720 for Catalyst 6506

Sup720 will not boot, actually, it will boot for about 5 mins and then keeps re-booting. In other words, it will not work.

Please rate this post if it helps.

116
Views
0
Helpful
3
Replies
CreatePlease to create content