I have a 6509 with redudant supervisor engines and msfc's and i am going to upgrade the software on them.
The question is how do i upgrade the catos on the standby engine as it seems i cannot get into it (session 2 does not work), only the active one, unlike the msfc's which i can access either one. My intention is to upgrade the active supervisor engine and then pull the card and when the standby becomes active upgrade that, or is there a better way.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...