05-12-2006 10:34 PM - edited 03-03-2019 03:11 AM
Hi
I have 3560 switchs.IOS VER:"c3560-ipbase-mz.122-25.SEB4.bin".
128 Of Ram.
32 Flash.
can i upgrade the IOS and let the switch Support the Enhanc EMI.if yes what can i DO.
10xs
05-13-2006 03:26 AM
You can install the IP Services or Advanced IP Services image on this switch without much effort BUT you must purchase the license.
HTH
Andy
05-13-2006 08:27 AM
Hi Ali,
You may wish to investigate ordering Cisco Part Number:
CD-3550-EMI=
EMI upgrade kit for standard versions of the Catalyst 3550-24, 3550-24PWR, 3550-24-DC, 3550-24-FX, and 3550-48 switches, Provides advanced IP
routing.
Have look at this link
http://www.cisco.com/en/US/products/hw/switches/ps646/products_qanda_item09186a00800913d3.shtml
HTH, if yes please rate the post.
Ankur
05-13-2006 08:57 AM
Yes, you can upgrade it. The part number is CD-3560-EMI=)
Ankur, original poster was looking for 3560 upgrade, you have mistakenly pointed to 3550 switch.
Please see the link below for more details:
http://www.cisco.com/en/US/products/hw/switches/ps5528/products_qanda_item09186a00801f3d71.shtml
HTH, Please rate if it does.
-amit singh
05-13-2006 10:29 PM
10XS All for ur time ur reply!
but.what is the way to upgrade u mean to buy a new image that support EMI Or support ip service
10xs
Ali
05-14-2006 04:06 AM
hi
which IOS that will Support my mentined case.i need to upgrade from the ipbase to IOS That support EMI.
10XS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide