Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Supporting remote sites with MAC based VLANS

We are considering deploying a remote site from our core 5500's switches. We are using VMPS to managed MAC based VLAN's. At the remote site we are bridging VLAN1 back to our core site so the VMPS database can be used off our core switch. The switch ports of our 3524's are normally in dynamic mode. So when a PC is connected to the Network it gets a MAC based VLAN. We are Routing VLAN's 8, 16,24 and 28 back to our core switch infrastructure.

Is this deisgn OK and how much bandwidth should we allow for bridging VLAN1

1 REPLY
Silver

Re: Supporting remote sites with MAC based VLANS

This design seems like it should be ok. You will probably find an answer for the bandwith quesion if you talk with Cisco.

80
Views
0
Helpful
1
Replies
CreatePlease to create content