Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Switch 1924 Does not go to POST

Does anybody know how to fix this, i get 1-3-6 ports on my switch AMBER, cisco(Trblsht) says replace firmware did this already... i am starting to think it might be my Mem anybody ever run into this problem??

1xNonfatal---Port loopback test.

3x Fatal---Content addressable memory test. Switch is not operational. Contact Cisco Systems.

6x Fatal---CAM SRAM test. Switch is not operational. Contact Cisco Systems.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Switch 1924 Does not go to POST

Hi Friend,

I believe this is a hardware failure and you may need to contact Cisco TAC to get it replaced.

Have a look at different POST results

http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v67x/19icg67x/19ictrbl.htm#xtocid209651

HTH

Ankur

1 REPLY

Re: Switch 1924 Does not go to POST

Hi Friend,

I believe this is a hardware failure and you may need to contact Cisco TAC to get it replaced.

Have a look at different POST results

http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v67x/19icg67x/19ictrbl.htm#xtocid209651

HTH

Ankur

107
Views
0
Helpful
1
Replies