Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

Switch 2960 with enhanced software image

I want to know does this switch with the enhanced image, so I can do the lab with the RSTP and MSTP with it.  


show ver
Switch#show version
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(1)SE2, RELEASE SOFTW
ARE (fc3)
Technical Support:
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Dec-11 00:46 by prod_rel_team

ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)

Switch uptime is 4 hours, 55 minutes
System returned to ROM by power-on
System image file is "flash:c2960-lanbasek9-mz.150-1.SE2/c2960-lanbasek9-mz.150-1.SE2.bin

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

cisco WS-C2960-24TT-L (PowerPC405) processor (revision F0) with 65536K bytes of memory.
Processor board ID FOC1317X0H2
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:25:83:88:E1:80
Motherboard assembly number     : 73-11473-05
Power supply part number        : 341-0097-02
Motherboard serial number       : FOC13163TGM
Power supply serial number      : DCA131482LN
Model revision number           : F0
Motherboard revision number     : A0
Model number                    : WS-C2960-24TT-L
System serial number            : FOC1317X0H2
Top Assembly Part Number        : 800-29859-02
Top Assembly Revision Number    : B0
Version ID                      : V05
CLEI Code Number                : COM3L00BRD
Hardware Board Revision Number  : 0x01

Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 26    WS-C2960-24TT-L    15.0(1)SE2            C2960-LANBASEK9-M

Configuration register is 0xF




IF this "show version" command cannot show the enhanced image information, so how can I check it, which command I should use it 

Thank you 


 Hi ,     You LANBASEk9 Image


Hi ,

     You LANBASEk9 Image supports both MSTP & RSTP , You cant find out all features supported by switch in single show commands . You can need find for feature set/ matrix , giving below feature matrix for your hardware

List of Show commands supported by your hardware model given below




New Member

Thank you very much, you help

Thank you very much, you help me to solve this big problem for me, so I can do the labs, thanks!!!!!laughyes

Hi , Here is the

Hi ,

 Here is the configuration guide for your image version 15.0 , you can find all relevant configuration related to your features .

PVST+, rapid PVST+, and MSTP are supported, but only one version can be active at any time. (For example, all VLANs run PVST+, all VLANs run rapid PVST+, or all VLANs run MSTP.) For more information, see the "Spanning-Tree Interoperability and Backward Compatibility" section.




Rate for the post if your query is answered . 

CreatePlease to create content