Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
dwu
New Member

Switch between Telcom router and firewall

I would like to set up a switch as outside, it 'sits' between telcom router and out firewall untrust.

router e1 -> cisco switch ->firewall untrust port, firewall trust port->our inside switch.

my question: how can I set up a management ip address for this outside switch to manage it from our inside network.

Thank you in adv.

2 REPLIES

Re: Switch between Telcom router and firewall

Since you are managing it from inside interface of firewall you should be able to configure the switch (vlan 1 or any management vlan) with a public IP address from the same subnet as the firewall and router.

Preferably use SSH over telnet.

dwu
New Member

Re: Switch between Telcom router and firewall

our router is managed by XO, firewall untrust 71.5.51.130, trust 192.168.11.1.

router - switch - firewall

can I assign 71.5.51.129 for the switch between? just wondering...

108
Views
0
Helpful
2
Replies
CreatePlease to create content