Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Switch catalyst 2900 xl

I have problem w/ switch 2900xl, one of the port not work and light indicator it show red color, here the information I get from SNMP :

--FastEthernet0/15 is administratively down, line protocol is down

Hardware is Fast Ethernet, address is 0002.7d31.ab4f (bia 0002.7d31.ab4f)

MTU 1500 bytes, BW 0 Kbit, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Keepalive not set

Auto-duplex , Auto Speed , 100BaseTX/FX

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output never, output hang never

Last clearing of "show interface" counters never

Queueing strategy: fifo

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

0 packets input, 0 bytes

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog, 0 multicast

0 input packets with dribble condition detected

1 packets output, 64 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

Please let me know what wrong ?

1 REPLY
New Member

Re: Switch catalyst 2900 xl

Dear friend,

This is a simple problem of Shut down of the port.

( from the message "administratively shut down" )

go to the interface config of the corresponding port and issue a " no shut down " command.

ur problem will be solved.

114
Views
0
Helpful
1
Replies
CreatePlease login to create content