Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Switch Catalyst 2924 XL - Flash formatted.

Hi,

I have one switch Cat 2924 XL.

One guy has tried the command "format flash" on it & then switchhed it off. Now when I'm booting it, it comes to "Switch: " prompt. It has no IOS because flash has been formatted.

Does any one know how can I recover it & install the IOS on it.

Thanks

-Naresh

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Switch Catalyst 2924 XL - Flash formatted.

Naresh,

Your only saviour is Xmodem.

http://www.cisco.com/warp/public/473/36.shtml#xmodem

Check out the procedures in above link.

Note : this procedure takes time

HTH

1 REPLY

Re: Switch Catalyst 2924 XL - Flash formatted.

Naresh,

Your only saviour is Xmodem.

http://www.cisco.com/warp/public/473/36.shtml#xmodem

Check out the procedures in above link.

Note : this procedure takes time

HTH

99
Views
0
Helpful
1
Replies
CreatePlease to create content