I currently have an active project on migrating one of my IDF's to another subnet, due to the need for more address space. I just came in to this position and I need some guidance. Can you direct me to what information I need to collect in order to make this migration happen? The environment consist of windows servers (DNS, DHCP, WINS, DC) 1 main router (cisco) for the plant, and 7 cisco switches. If this is posted in the wrong forum I apologize. Any help is greatly appreciated.
what are those 7 switch models? I have found some migration process documents in cisco website for 2950 switches and etc.So, i think depending on your switch model, you can search the migration process involved in cisco website.Try out using the keyword "Switch migration process" in cisco search
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...