I'd like to build the following network architecture:
At this time on our server farm 6500 switches' we have assigned some pvlan to our web housing customers. Every customer is assigned on a pvlan port. The gateway is a Pix firewall in high availability configured on promiscuous mode.
set vlan 3 name VLAN_HOUSING type ethernet pvlan-type primary
set vlan 31 name PVLAN_HOUSING type ethernet pvlan-type isolated
set pvlan 3 31
set pvlan 3 31 3-37/48,5/37-48,6/37-48
set pvlan mapping 3 31 3/4
set pvlan mapping 3 31 5/3
set vlan 299 name VLAN_Housing2 type ethernet pvlan-type primary
set vlan 399 name PVLAN_Housing2 type ethernet pvlan-type isolated
set pvlan 299 399
set pvlan 299 399 8/34-48,7/34-48
set pvlan mapping 9/4
set pvlan mapping 10/4
We have the same configuration also for some community vlans.
To everyone of them corresponds a port on web farm firewalls (2 failover pix).
I'd like to reduce the number of interfaces on the firewall and on the switch using 1 gb ports and configuring tag vlan 802.1q or ISL.
Do you think it may be possible??
If you think so, can you please send me some configuration hints?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.