Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

swithching technology

i am suppose to deploy 100 user campus network in a hall within a buiding using cisco swithches ,i wonder the type of swithch i will use for this ,the client wants a 1:1 redundancy on the critical path ,pls advice

1 REPLY
Bronze

Re: swithching technology

There are many options for you. If you looking for 100 users and only looking for layer 2 capabilities then Cat4006 series would work the best. This switch also come with the supervisor module( supervisor 3) which can do both layer 2/3 functionality.Has the features for support voice.

http://www.cisco.com/univercd/cc/td/doc/pcat/ca4000.htm

http://www.cisco.com/warp/public/cc/pd/si/casi/ca4000/

http://www.cisco.com/warp/public/cc/pd/si/casi/ca4000/prodlit/index.shtml

Also there are fixed configuration stackable switches if you want , you can look into these Catalyst 3550 or 2550

http://www.cisco.com/univercd/cc/td/doc/pcat/ca3550.htm

http://www.cisco.com/warp/public/cc/pd/si/casi/ca2950/prodlit/index.shtml

http://www.cisco.com/warp/public/cc/pd/si/casi/ca3550/prodlit/index.shtml

and here is the general link for the catalyst 6000 ( which is also a good choice and all other cisco switches. which is also the good choice )

Hope this helps

80
Views
0
Helpful
1
Replies
CreatePlease login to create content