We have a Stratacom network made of three IGX 8420 (SWSW 9.2.23). The IGXs clocks have one hour in advance. I know that the command 'cnftime' is used to change the time, but I have not found any command to set time automatically when clocks are change so as to save daylight. I mean, a command similar to the command "clock summer-time DST recurring last Sun Mar 2:00 last Sun Oct 3:00" in a router.
Is there any equivalent command in a IGX 8420 with SWSW 9.2.23?.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...