Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

%SYS-3-SYS_LCPERR3

%SYS-3-SYS_LCPERR3:Module 6: Pinnacle #2 : Port

#3, Frames with CRC errors on RBus (PI_PN_S_RBUS_ERR_CNT_REG - 0x159) = 21:

%SYS-3-SYS_LCPERR3:Module 6: Pinnacle #2 : Port

#2, Frames with CRC errors on RBus (PI_PN_S_RBUS_ERR_CNT_REG - 0x159) = 21:

The above message is comming all of sudden in 6509

running on cat ios we have not changed any configuration on the switch what could be the reason behind it and how to correct the above message..

how it would effect my Network.

2 REPLIES
New Member

Re: %SYS-3-SYS_LCPERR3

The Pinnacle and COIL errors you're seeing on module 6 indicate a problem with the module. The COIL asics control the 10/100 ports in groups of 12, and the Pinnacle asic controls the four COIL asics. Replace the 6348 module in slot 6 and the errors should go away.

-Rich

New Member

Re: %SYS-3-SYS_LCPERR3

Hi ,

Thanxs for replying but the module is 16 port

1000BaseT ..

16 1000BaseT Ethernet WS-X6316-GE-TX

pls suggest what to do either we should change the

configuration on port 2 and 3 or replace the whole module.

209
Views
0
Helpful
2
Replies
CreatePlease to create content