08-12-2002 12:03 PM - edited 03-02-2019 12:38 AM
hello,
please can anybody explain me the following error mesage on a cat 4006 running with cat os 6.2.1:
%SYS-4-P2_WARN: 1/Blocked queue on gigaport 31
to which blade is gigaport 31 corresponding ?
these blades are into the switch:
cat 4 Sup 2
WS-X4013
WS-X4306
WS-X4232-L3
thanks,
marc
08-12-2002 12:13 PM
You have not pasted the full error you are seeing. gigaport 31 maps to slot 3. Check to see anything out of the ordinary in slot6, like port errors/broadcast traffic etc. Also if you get a chance upgrade the software to 6.3(8). ALso paste the output of show nvramenv 1
08-14-2002 12:46 AM
hi,
sorry for the time delay.
NNMDGNS114> (enable) sh nvramenv 1
PS1="rommon ! >"
?="0"
DiagBootMode="post"
MemorySize="64"
ResetCause="20"
AutobootStatus="success"
BlockedTxQCount="1577"
NNMDGNS114> (enable)
and here the full error log :
2002 Aug 13 13:12:13 %SYS-4-P2_WARN: 1/Blocked queue on gigaport 31, ( 1578 : 0)
thanks,
marc
08-14-2002 04:07 AM
Gigaport 31 corresponds to port 1/2. Is this port heavily loaded (show mac 1/2). If it is not heavily loaded, it may be a bad supervisor. Swap 1/1 and 1/2, does it follow the port or the connection??
Also, post a show counters 1/2
I would strongly suggest upgrading the software.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide