Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

%SYS-4-P2_WARN: 1/Blocked queue on gigaport 31 on cat 4006

hello,

please can anybody explain me the following error mesage on a cat 4006 running with cat os 6.2.1:

%SYS-4-P2_WARN: 1/Blocked queue on gigaport 31

to which blade is gigaport 31 corresponding ?

these blades are into the switch:

cat 4 Sup 2

WS-X4013

WS-X4306

WS-X4232-L3

thanks,

marc

3 REPLIES
Cisco Employee

Re: %SYS-4-P2_WARN: 1/Blocked queue on gigaport 31 on cat 4006

You have not pasted the full error you are seeing. gigaport 31 maps to slot 3. Check to see anything out of the ordinary in slot6, like port errors/broadcast traffic etc. Also if you get a chance upgrade the software to 6.3(8). ALso paste the output of show nvramenv 1

New Member

Re: %SYS-4-P2_WARN: 1/Blocked queue on gigaport 31 on cat 4006

hi,

sorry for the time delay.

NNMDGNS114> (enable) sh nvramenv 1

PS1="rommon ! >"

?="0"

DiagBootMode="post"

MemorySize="64"

ResetCause="20"

AutobootStatus="success"

BlockedTxQCount="1577"

NNMDGNS114> (enable)

and here the full error log :

2002 Aug 13 13:12:13 %SYS-4-P2_WARN: 1/Blocked queue on gigaport 31, ( 1578 : 0)

thanks,

marc

Cisco Employee

Re: %SYS-4-P2_WARN: 1/Blocked queue on gigaport 31 on cat 4006

Gigaport 31 corresponds to port 1/2. Is this port heavily loaded (show mac 1/2). If it is not heavily loaded, it may be a bad supervisor. Swap 1/1 and 1/2, does it follow the port or the connection??

Also, post a show counters 1/2

I would strongly suggest upgrading the software.

See http://www.cisco.com/warp/public/770/fn14464.shtml

248
Views
0
Helpful
3
Replies
CreatePlease to create content