Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

syslog messages

I have a Catalyst 6513 running Native IOS and the following messages appear in my syslog file:

MainHandler 38

SpanCo 11

PktCon 40

Could anyone help me with understanding what this messages are related to.

Any help would be greatly appreciated.

2 REPLIES
Cisco Employee

Re: syslog messages

Can you paste the output of

sh ver

sh log

sh debug

remote command switch show debug

New Member

Re: syslog messages

Catalyst6513# sh log

Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns)

Console logging: level debugging, 156015 messages logged

Monitor logging: level debugging, 36 messages logged

Buffer logging: level debugging, 156025 messages logged

Exception Logging: size (4096 bytes)

Trap logging: level warnings, 42 message lines logged

Logging to 192.168.1.10, 42 message lines logged

MainHandler 38

SpanCo 11

PktCon 40

Catalyst6513#sh ver

Cisco Internetwork Operating System Software

IOS (tm) c6sup2_rp Software (c6sup2_rp-PO3SV-M), Version 12.1(19)E1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Sun 29-Jun-03 21:00 by nmasa

Image text-base: 0x40008C00, data-base: 0x4196E000

ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)

BOOTLDR: c6sup2_rp Software (c6sup2_rp-PO3SV-M), Version 12.1(19)E1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)

kukush1-bb1-gw uptime is 4 days, 8 hours, 7 minutes

Time since kukush1-bb1-gw switched to active is 4 days, 8 hours, 6 minutes

System returned to ROM by power-on (SP by power-on)

System restarted at 01:19:58 BG Thu Nov 27 2003

System image file is "sup-bootflash:c6sup22-po3sv-mz.121-19.E1.bin"

cisco WS-C6513 (R7000) processor (revision 1.0) with 458752K/65536K bytes of memory.

Processor board ID TSC07030020

R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

X.25 software, Version 3.0.0.

Bridging software.

19 Virtual Ethernet/IEEE 802.3 interface(s)

48 FastEthernet/IEEE 802.3 interface(s)

80 Gigabit Ethernet/IEEE 802.3 interface(s)

381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

I have no debugs at any level

187
Views
0
Helpful
2
Replies
CreatePlease to create content