Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Syslogs

Hi,

The problem is that not all syslog messages come to my configured syslog server.

The problem is on Catalyst 4003 CatOS 4.5.

I set :

Severity level 6

Facility local7

set the ip address of my syslog server, and enabled the logging server.

Now, the messages with a severity level lower than 6 (informational) do not get to syslog server, neither come messages with severity level of 6 (that is very starnge).

When I set the severity level of 5, -the messages with sevrity 5, do get to syslog server, but the messages with lower levels dont come. Why is this hapenning? On my IOS switches and routers everithyng is fine, this happen only on catos.

How can I get ALL my syslog messages to syslog server?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Syslogs

Hi Friend,

Good to know it worked. Yes the message with lower levels (less than 6) will also be sent to the syslog server as it is sent in IOS.

HTH. if yes please rate the post.

Ankur

4 REPLIES

Re: Syslogs

Hi Friend,

Can we try few command out here

set logging level all 6 default

It should work. Can you please try this and update if it works

HTH

Ankur

Re: Syslogs

Hi Friend,

Can we try one command out here

set logging level all 6 default

It should work. Can you please try this and update if it works

HTH

Ankur

New Member

Re: Syslogs

Yes. It did work, at least a message with level sevrity 6 came to syslog server. Does it mean that messages with lower levels will come to syslog server, like in IOS? Waiting for reply...

Re: Syslogs

Hi Friend,

Good to know it worked. Yes the message with lower levels (less than 6) will also be sent to the syslog server as it is sent in IOS.

HTH. if yes please rate the post.

Ankur

103
Views
0
Helpful
4
Replies
CreatePlease to create content