Remove all of your cards/etc from the chassis, try rebooting. Does it work? If yes, reinsert one card at a time until you find what is causing the problem. If that doesn't work, try opening the chassis and reseating any loose modules such as CPU, memory, AIM modules, whatever.
If you open the chassis, reinsert all modules, remove all cards, and it still won't boot... contact TAC, you will probably have to RMA due to a hardware failure.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...