04-15-2006 08:26 PM - edited 03-03-2019 02:49 AM
Hi ,
When giving "sh Tech-support" command output includes of " sh log" also ??
regards
Neo
04-15-2006 09:43 PM
Hi Neo,
Yes "sh tech" includes the "sh logs" but in CATOS switch "sh logs" will not display the logs which are generated by the switches as system messages and other messages and you need to issue one more command to get the logs and that is
"sh logging buffer 1023" only for CATOS
for any IOS related device sh tech support will give you the desired logs.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_sp_te.htm#wp1030164
HTH, if yes please rate the post.
Ankur
04-17-2006 06:18 AM
Hi,
I am doing sh tech-support for cisco 2651XM and i am not getting " sh log" in that.any idea ?
regards
Neo
04-17-2006 06:27 AM
Hi Neo,
Unfortunately, this is one of those annoying inconsistencies in IOS. Some versions of IOS do include the "show log" as part of the show tech, while others do not.
HTH,
Bobby
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide