Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Telnet access problemes

I'm trying to access a 3500 switch via telnet,this Is what I get, I can't type anything, help appreciated.

I didn't forget the password, what appends is, you

open a telnet (I use CRT)

session with the switch and the switch return a

screen if I already tried to

type a password, if you press enter, it appends to.

User Access Verification

Password:

Password:

Password:

% Bad passwords

6 REPLIES
New Member

Re: Telnet access problemes

Sounds like you need the password to me!!

Don't forget that as you type you will not see anything on the screen!

Ali

New Member

Re: Telnet access problemes

My problem is that as soon you connect, the screen appears if you already tryed to type a password, i can't type anything ..

New Member

Re: Telnet access problemes

can you let me know the how you telnet to the device, what do you mean by CRT?i don't undestand

-Bala

New Member

Re: Telnet access problemes

CRT is my telnet software, but th same thing appends when i use hyperterminal

New Member

Re: Telnet access problemes

Telnet configuratoin in a device doesn't have any properties that a user can configure like Console, so i suspect the problem with the way you telnet to the device,

please try connecting form your PC this way WINDOWS -> Start -> Run -> telnet and let me know the result.

New Member

Re: Telnet access problemes

i had already try it, this appens from time to time, the solution until now was to restart the switch

111
Views
0
Helpful
6
Replies