Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Telnet session timeout

I connect to my office test router through telnet. To overcome session timeout problem I changed the absolute-timeout to 480 minutes, not realizing that it will disable telnet connectivity after 480 min. Now I can not connect to my router. I will appreciate if some one could explain how absolute-timeout works.

1 REPLY
Bronze

Re: Telnet session timeout

check the below link:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt1/drtermop.htm#xtocid126731

you probably need to use exec-timeout or session-timeout commands to achieve your requirement

2509
Views
0
Helpful
1
Replies
CreatePlease to create content