cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
206
Views
0
Helpful
1
Replies

TFTP access

adagost
Level 1
Level 1

I reconfigured a switch and it is working fine now. I changed the ip address and default gateway and now I can not ping or telnet the switch from anywhere.

Any thought on troubleshooting this??

My other question is this - how do I upload a new startup-config file to my catalyst 3548 switch through hyperterminal while connected to the console port????

Thank you

1 Reply 1

bsivasub
Level 4
Level 4

Is the ip address being used somewhere else ? Does the ARP entry point to the right mac-address. Can you initiate the ping from the switch first ? If you are pinging from the same subnet make sure the ARP is getting correctly populated.

If you can reach the tftp server then you can use the copy tftp: start or copy tftp: run command .

if not you have to use "cut and paste" :)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: