Re: TFTP Fails in Management Station to Device Tool
If a hostname is entered instead of ip address, the program always does a name lookup to find out the address. The test will fail if it cannot find any address. For TFTP (availability test, port 69; device must be configured as a TFTP Server). This test sends a TFTP request to the TFTP port (69) of the destination device.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...