Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

tftp-server differences in 12.1 and 12.3

I was trying to set up tftp server on a 2514 for IOS upgrade and found that on the same 2514 platform with 14MB RAM and 16MB flash. I ran into problems with IOS 12.3(5). Here are the observatios:

1) When 12.1(20) is running,

Router(config)#tftp-server ?

flash: Allow URL file TFTP load requests

flh: Allow URL file TFTP load requests

lex: Allow URL file TFTP load requests

null: Allow URL file TFTP load requests

nvram: Allow URL file TFTP load requests

system: Allow URL file TFTP load requests

2) when 12.3(5) is running,

Router-A(config)#tftp-server ?

null: Allow URL file TFTP load requests

nvram: Allow URL file TFTP load requests

system: Allow URL file TFTP load requests

Router and Router-A are the same exact model with same amount of RAM and flash.

3) on Router-A with c2500-i-l.123-5.bin, I tried "tftp-server system:\flash:c2500-is-l.123-5a.bin", which did not give me "file not found" error. But when I tried to connect to it from the target c2514 (in BootRom after changing to 0x2101), it always failed to load the image. I think it's because I couldn't do "tftp-server flash:\..."

Why does 12.1 have more tftp-server options than 12.3?

4) "show flash" works in 12.1 but not in 12.3. I could only "dir" to show the image in 12.3. "show file system" won't show the details. Is there an eqivilent of "show flash" in 12.3?

Thanks!

1 REPLY
Bronze

Re: tftp-server differences in 12.1 and 12.3

Equivalent of show flash is dir flash. And the TFTP command differs for IOS versions

118
Views
0
Helpful
1
Replies
CreatePlease to create content