Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

THREAD process cause Hig cpu on WS-C5505

87 113317635 11241592 5642000 99.12% 42.73% 13.41% -2 THREAD

****************************************

My 5505 every 5-6 minute take the processor of the Switch at 99% pollinf the Fasteth to down.

I identified the process THREAD that cause this but cannot understand what is this process?

How can I bypass or reduce this process?

Many thank for you answers.

Alberto

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: THREAD process cause Hig cpu on WS-C5505

THREAD is an SNMP process. Check for any unsual SNMP activity/polling. Disable SNMP as a workaround.

3 REPLIES
Cisco Employee

Re: THREAD process cause Hig cpu on WS-C5505

THREAD is an SNMP process. Check for any unsual SNMP activity/polling. Disable SNMP as a workaround.

New Member

Re: THREAD process cause Hig cpu on WS-C5505

Hi

I have just been experiencing the same issue with this THREAD process... Did dyou ever find a solution? If so could you possibly let me know the fix for this?

Cheers

Nick

New Member

Re: THREAD process cause Hig cpu on WS-C5505

I have now found the reason for this.

THREAD is used by SNMP

Check your nms station for frequent and high polling.

129
Views
0
Helpful
3
Replies