i have got 6509 as main switch & 3750 as standby switch, both running HSRP. client switch is 2950-24T, 1 connected to 6509 & other to 3750, both 3750 & 6509 connected each other by trunking, now i get 30 seconds of time delay when i remove the 6509 link in 2950,which is very huge delay, when i made a test configuration between 3550/3750 & 2950, i got only 8 seconds of delay, which is acceptable, but when i connected lively, with 6509/3750 & 2950, i am getting 30 seconds of delay. below are the configuration. enabled spanning tree on these switchez but still couldn't solve my problem.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...