To allocate the DNS IP@ server by the interface dialer.
I have a configuration with some analogical and ISDN callers. Each user have the own interface dialer in purpose to allocate to each user, it own IP @. My customer would like to allocate the DNS (and WINS) IP@ server in the way not to use host file on laptops.
It is possible to allocate the DNS (and WINS) IP @ server either dialer by dialer or overall for all dialer in general configuration ?
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...