I have 15 dialers in Cisco 1603 for different ISDN connections, I increment "boot buffersize" and I'll be able to add next dialer, but after rebooting router - added dialer disapear. How I can increase configuration file?
The NVRAM that stores your config is about 7K in size. This should be adequate, even for your config. It looks like you have a DRAM issue. How much memory is there in your 1603? Is it ia 1603 or a 1603R? The problem can also be IOS-version related. Need more info to check this.
Posting a -sh ver- would supply the required info.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...