Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

traceroute in 6509

hi when i run a traceroute in a 6509 switch it is giving the below

details

BHUSD_6509#traceroute 12.164.240.161

Type escape sequence to abort.
Tracing the route to 12.164.240.161

  1  *  *  *
  2  *  *  *
  3  *  *  *
  4  *  *  *
  5  *  *  *
  6  *  *  *
  7  *  *  *
  8  *  *  *
  9  *  *  *
10  *  *  *
11  *  *  *
12  *  *  *
13  *  *  *
14  *  *  *
15  *  *  *
16  *  *  *
17  *  *  *
18  *  *  *
19  *  *  *
20  *  *  *
21  *  *  *
22  *  *  *
23  *  *  *
24  *  *  *
25  *  *  *
26  *  *  *
27  *  *  *
28  *  *  *
29  *  *  *
30  *  *  *

I am not getting a ip address or whatosever should come is that normal or anything we should do..

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Super Bronze

Re: traceroute in 6509

Hi

Post your config, and we'll tell you what's wrong...

Looks like you may not have a proper IP/DG combination, or proper routing configured...

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Super Bronze

Re: traceroute in 6509

Hi

Yes - if you don't have 'ip routing' enabled, then you need the 'ip default-gateway x.x.x.x" command configured.

If you have ip routing, you would want to enter 'ip route 0.0.0.0 0.0.0.0 x.x.x.x'

In both of these examples x.x.x.x would be the default GW for the subnet.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
3 REPLIES
Super Bronze

Re: traceroute in 6509

Hi

Post your config, and we'll tell you what's wrong...

Looks like you may not have a proper IP/DG combination, or proper routing configured...

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Community Member

Re: traceroute in 6509

we dont have a gateway of last restort so i assume that that's y the traceroute is not working

Super Bronze

Re: traceroute in 6509

Hi

Yes - if you don't have 'ip routing' enabled, then you need the 'ip default-gateway x.x.x.x" command configured.

If you have ip routing, you would want to enter 'ip route 0.0.0.0 0.0.0.0 x.x.x.x'

In both of these examples x.x.x.x would be the default GW for the subnet.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
500
Views
0
Helpful
3
Replies
CreatePlease to create content