Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Traffic Prioritization on a Cisco 2621XM Router

We would like to give greater priority to telnet traffic to our mainframe over a 2MB leased line connection.

All other traffic is to be treated as low priority.

What would be the best way of achieveing this on a Cisco 2621XM router?

Could you kindly provide a sample config.

Thanks in advance for your help.


Re: Traffic Prioritization on a Cisco 2621XM Router

Upto 2MB connections, the default queueing is WFQ, which is weighted fair queueing, which gives higher weights to interactive traffic such as telnet. compared to bandwidth hogging apps such as a file transfer, ftp session.

Give a show queue serial 0 and you should get the queueing strategy thats currently enabled on the interface. It should be written weighted fair for WFQ.

If you additionally want, high priority for telnet and low for everything else, you can use priority queueing.

Key in the following commands.

priority-list 1 protocol ip high tcp telnet

int s0

priority-group 1

The above commands create a priority list of protocols, with telnet traffic in the high queue, while the rest by default goes to normal queue.

and priority-group 1 command attaches this priority list to the physical interface.

If you want to make it more granular by specifying ip addresses of end points, you can use the "list " parameter for the priority-list, and create an access list matching the telnet traffic specific to either host.


Cisco Employee

Re: Traffic Prioritization on a Cisco 2621XM Router

Are these circuits frame-relay , ATM etc...

either way you could do LLQ or CBWFQ .

CBWFQ over Frame

LLQ over Frame




New Member

Re: Traffic Prioritization on a Cisco 2621XM Router

These are 2MB Leased Lines.