Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Traffic Shaping for perticular traffic

class-map match-any SYSLOG-CMAP
match access-group name SYSLOG-ACL


policy-map SYSLOG-PMAP
class SYSLOG-CMAP
  shape average 250000

interface GigabitEthernet0/1
ip address 1.1.1.1 255.255.255.252
ip flow ingress
load-interval 30
duplex full
speed 100
service-policy output SYSLOG-PMAP

                 

-----------------------------#---------------------------------------#------------------------------#-------------------------------------#---------------

Router1#show policy-map int GigabitEthernet0/1
GigabitEthernet0/1

  Service-policy output: SYSLOG-PMAP

    Class-map: SYSLOG-CMAP (match-any)
      712495474 packets, 394564809213 bytes
      30 second offered rate 41000 bps, drop rate 23000 bps
      Match: access-group name SYS-LOG-ACL
        712495474 packets, 394564809696 bytes
        30 second rate 41000 bps
      Queueing
      queue limit 64 packets
      (queue depth/total drops/no-buffer drops) 0/152567902/0
      (pkts output/bytes output) 559927554/295263742429
      shape (average) cir 250000, bc 1000, be 1000
      target shape rate 250000

    Class-map: class-default (match-any)
      3774914087 packets, 1413482437872 bytes
      30 second offered rate 2796000 bps, drop rate 0 bps
      Match: any

      queue limit 64 packets
      (queue depth/total drops/no-buffer drops) 0/19837/0
      (pkts output/bytes output) 3817743535/1477901813111

=====================================================

Hi everyone,

In the above configuration, I configured traffic shaping to shape the syslog traffic to certain limit. My question is, Can I apply traffic shaping to perticular traffic ? What will happen to the remaining traffic ? We have ethernet hand-of to provider but total bandwidth we can use is 8M, which is controlled by ISP. We just send all the traffic without any shaping.

Thanks

Everyone's tags (3)
241
Views
0
Helpful
0
Replies
CreatePlease to create content