Can anyone give me a basic understanding of what transit and portable ip address pools are.
Our ISP has assigned us a transit ip pool which I would like to subnet into 2 and route one subnet to a remote network. However I am informed by the iSP that this is not possible as the transit ip pool is fixed and cannot be subnetted. They want us to purchase a block of portable ip addresses which we could subnet and route as we please.
I have looked up the internet for information on this topic to no avail.
I think what your ISP is trying to say is that they have a defined area or transfer net (or in your case transit) which by design was laid out by the ISP. You have a possibility to use other Nets or portable pools, (IP's defined outside of the fix ranges.) Usually the Transfer or Transit nets are small, to minimize the Routing tables and access across the WAN. Hope this helps some.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.