Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Transparent Bridging Access Control

Can someone tell me why, when I configure bridging access lists (700 type) there is interuption of traffic flow. This loss of traffic flow occurs when entering the access-list 700 statements in global configuration mode.

There is a section contained in 'Configuring Transparent Bridging' on CCO which states the following "Configuring bridging access lists of type 700 may cause a momentary interruption of traffic flow." But I cannot find an explanation for this behaviour.

Thanks

John Whitehouse

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Transparent Bridging Access Control

The reason for the momentary interruption of traffic when adding an access list 700 is due to the bug CSCdy83396.

2 REPLIES
Silver

Re: Transparent Bridging Access Control

The reason for the momentary interruption of traffic when adding an access list 700 is due to the bug CSCdy83396.

New Member

Re: Transparent Bridging Access Control

Thanks for the information. I have looked at the bug you mentioned and this would appear to be what we are running into.

75
Views
0
Helpful
2
Replies