Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Troubles with a Catalyst 6506

Hi, I have a catalyst 6506 and I can’t connect to it by console.

The catalyst has a WS-X6K-SUP1A-2GE that has the following leds:

Status in orange

System in green

Active without light

Pwr mgmt in red

Sometimes it boots with all lights in green, but I also can’t connect to it.

What can I do?

Thanks

4 REPLIES
Silver

Re: Troubles with a Catalyst 6506

Sounds like a hardware failure on one of your power supplies.

New Member

Re: Troubles with a Catalyst 6506

I don't think so, because the power supplies' lights are green.

Also I'm using the same cable that I used to apply.

New Member

Re: Troubles with a Catalyst 6506

I don't think so, because the power supplies' lights are green.

Also I'm using the same cable that I used to apply.

New Member

Re: Troubles with a Catalyst 6506

Re: not being able to 'connect' via a console.

Depending on the model of SUP, you might need a straight through cable rather than the regular Cisco cable.

106
Views
0
Helpful
4
Replies