I'm trying to troubleshoot an ADSL link (BT Broadband in the UK). Hardware is 2600 with WIC1-ADSL. The config is;
no ip address
no atm ilmi-keepalive
encapsulation aal5mux ppp dialer
dialer pool-member 1
ip unnumbered FastEthernet0/0
dialer pool 1
ppp chap hostname <REMOVED>
ppp chap password <REMOVED>
ip route 0.0.0.0 0.0.0.0 Dialer1
The ATM interface is up/up. The PVC 0/38 is listed as up so it all looks OK. However when I try to ping a IP address I see nothing. I don't get as far as ppp negotiation and think there is an ATM problem. When I debug ATM events I get the following error;
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.