Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Troubleshooting Channelized SONET connectivity Issues

Does anybody have any links to troubleshooting channelized sonet PA's? We have recently installed a Cisco 10008 ESR and I am desperately trying to find some troubleshooting information on (for example):

- explaining the output of the show controllers sonet xxx command (High Order Path/Low Order Path etc).

- bouncing the individual T1/E1 timeslot within the High-Order-Path.

- changing the clock source on the individual T1/E1.

I have spent a considerable amount of time on Cisco.com/google.com researching the issue to no avail.

Extract from the running-config:

controller AU-4-TUG-3 2/0/1.1/1

mode c-12

tug-2 1 e1 1 unframed

tug-2 2 e1 1 unframed

Any pointers would be much appreciated.

2 REPLIES
New Member
New Member

Re: Troubleshooting Channelized SONET connectivity Issues

Sorry for the delay in responding back, we are using a 4-Port Ch STM-1 on a 10008.

Many thanks for your help.

226
Views
0
Helpful
2
Replies