Can anyone give give me pointers as to which direction does an output queue drop and 2)input queue drop happen for a serail interface (ie for traffic coming in from WAN=input queue for serial and traffic leaving the serial outwards onto WAN =output ...What does input queue drops on a serial interface signify..i have seen some documents on cisco site but im not clear as to the direction of the packet flow for an input and output queue for 1)Serial interface
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...