Trunks are configured to carry multiple VLANs over a single Link. From your description, it appears that you have only one VLAN in your network and hence there is no need for any trunks. There is no other benefits you'll get by configuring a trunk
Not unless you plan on running multiple vlans down the same connection to the 2924 . To me it seems like all our single attached , nontrunked connections are slightly faster but that is just an observation in our operating environment .
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...