It is possible to have two routers that have an ethernet interface sharing the same netwotk to have serial interfaces connected to X.25 WAN sharing the same IP address. The idea is that one router serial interface act as a Backup connection for the remote
hosts(which connects via X25) to the other router serial interface.
Re: two routers with the same interface ip address?
I will try to explain it clearly.
The remote hostA connects to my server using tcp over x.25. I have static nat configured overloading S0 ip address ( connected to X25 PDN) so the host just gives th s0 ip address to connect to the server. I want that in case of link 1 failure the host uses the link 2 wich has another x25 address (this is the far I can go configuring backup line on the remote host). The routers doesnt connect to each other through the wan. Using the same IP address for both router will permit the backup line to work.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.