12-04-2003 08:42 AM - edited 03-02-2019 12:08 PM
All:
Are these real time counters? I understand that they measure outbound and inbound utilization, expressed as fracs of 255.
DLR1#sh int s1/0:0 | i load
reliability 255/255, txload 1/255, rxload 1/255
However, I don't ever see them changing.
Am I correct in saying my utilization for the load interval would be 12.5%
??
tia
S
12-04-2003 10:08 AM
255/255 is 100% link utilization. In your case 1/255 is almost 0% (0.39% to be precise).
Cheers
12-04-2003 10:28 AM
U can give an extended ping to the remote serial interface to see if the load varies. Load interval is the interface statistics data for every 5 minutes(by default). You can change it to 30 second load interval by specifying "loadinterval 30" under the config-if mode
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide