Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UBR 900 series DHCP NAT

I am looking for the way(if possible) to get a UBR900 series to pull a dynamic public IP and NAT it to private IP's on a UBR provisioned for one dynamic IP. I use these all the time to run static IP LANS, but have never set one up to pull a DHCP IP from the CMTS. Any help would be greatly appreciated.

Scott

2 REPLIES
Cisco Employee

Re: UBR 900 series DHCP NAT

YES..you can configure ubr900 for that. Here is the url with the sample config on that

http://www.cisco.com/warp/customer/109/cable_dhcp_proxy.shtml

New Member

Re: UBR 900 series DHCP NAT

yes, i found that late in the morning after hours of searching the web, thank you very much for the reply. all is well now. thanks again for your input.

Scott

97
Views
0
Helpful
2
Replies
CreatePlease login to create content