Hi
We have a problem with an etherchannel trunk between 2 Cat 6513's. The etherchannel is 8Gb split across 2 Copper 10/100/1000Mb 16 port cards in each chassis. The trunk uses ports 13 - 16 on slot 5 in one chassis to 13 - 16 on slot 5 in the other chassis and 13 - 16 on slot 6 in one chassis to 13 - 16 in slot 6 on the other chassis.
We appear to have had a UDLD Detection which error disabled all 4 of the links from slot 6 to slot 6 at the same time. IE ports 13 - 16 on slot 6 of both chassis went into error disabled state.
Could this be a ASIC hardware problem on one of the cards? If so, how do we establish which end of the trunk the problem exists? All other connections on these slot 6 cards are working fine.